FreezeFrame 3 (includes FreezeView 3)
Drivers for USB Cameras (from Sentech). Also available from Actimetrics here.
Run the x86 installer StCamSWare_x86.exe to install drivers and a program for testing the cameras (StCamSWare.exe).
Drivers for ACT-710 Digital Interface (from National Instruments). Also available from Actimetrics here. Or use the DAQmx installer disk that comes with the ACT-710.
Drivers for IMAQ Board (PCI-14xx) also available from Actimetrics here.
Run this installer using Autorun.exe (in the VISIONACQ folder).
When you are asked for which features to install, leave NI-IMAQ and NI
Measurement and Automation Explorer selected so that they will install.
Set NI-IMAQdx and NI-IMAQ I/O not to install
by clicking on each and selecting "Do not install
this feature".
Drivers for ACT-710 Digital Interface (from National Instruments). Also available from Actimetrics here. Or use the DAQmx installation disk that comes with the ACT-710. These drivers are not required for the PCI version of LimeLight unless you have an ACT-710 interface box for controlling digital outputs. The A6822 breakout box for the National Instruments PCI-1409 or 1410 that connects to multiple cameras does not require these drivers.